Patton SmartNode Konfiguration
Beschreibung
Patton SmartNode Mediengateways benötigen eine passende Konfiguration zum Betrieb an LocaPhone VoIP TK-Systemen.
LocaPhone Versionen
RELEASE 5 RELEASE 4 RELEASE 3 RELEASE 2
Patton SmartNode Konfiguration
LocaPhone-Versionsabhängigkeit der genutzen SIP-Ports
Version | Dienst | Richtung | Port | Beschreibung |
---|---|---|---|---|
Release 5 | PJSIP | extern | 5070 | SIP-Trunks, Medien-Gateways ISDN S0/S2M |
Release 5 | chan_sip | intern | 5060 | Endgeräte, DECT-Systeme, Zusatz-Geräte |
Release 4 | chan_sip | intern+extern | 5060 | alle Verbindungsarten |
Release 3 | chan_sip | intern+extern | 5060 | alle Verbindungsarten |
Release 2 | chan_sip | intern+extern | 5060 | alle Verbindungsarten |
Beispiel-Konfiguration für SN411x FXS
Die folgende Konfiguration ist gültig für eine Smartnode SN411x(S) (SmartWare) mit FXS-Ports.
SmartWare SN411x
#----------------------------------------------------------------#
# #
# SN4112S/JS/EUI #
# R6.9 2017-03-13 H323 SIP FXS FXO #
# 2020-09-29T16:19:27 #
# SN/00A0BAXXXXXX #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
clock local default-offset +01:00
clock local dst-rule CEST +02:00 from 02:00 mar last sunday until 03:00 oct last sunday
dns-client server 192.168.0.1
webserver port 80 language en
sntp-client
sntp-client server primary 0.de.pool.ntp.org port 123 version 4
sntp-client server secondary 1.de.pool.ntp.org port 123 version 4
system hostname FXGW01
system
ic voice 0
profile ppp default
profile tone-set default
dtmf-signal-level -3
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax transmission 2 bypass g711alaw64k rx-length 10 tx-length 10
profile pstn default
profile ringing-cadence default
play 1 1000
pause 2 4000
profile sip default
no autonomous-transitioning
profile aaa default
method 1 local
method 2 none
context ip router
interface IF-ETH0
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context cs switch
digit-collection timeout 4
routing-table called-e164 ROUTE-FROM-SIPPBX
route 98 dest-interface IF-FXS0
route 97 dest-interface IF-FXS0
routing-table called-e164 ROUTE-DIGITCOLLECT-FROM-FXSPORT
route .T,# dest-table ROUTE-FROM-FXSPORT
route default dest-table ROUTE-FROM-FXSPORT
routing-table called-e164 ROUTE-FROM-FXSPORT
route default dest-interface IF-SIPPBX
interface sip IF-SIPPBX
bind context sip-gateway GW-SIP
route call dest-table ROUTE-FROM-SIPPBX
remote 192.168.0.40
hold-method direction-attribute sendonly
early-disconnect
call-reroute emit
address-complete-indication accept set
privacy
address-translation outgoing-call diversion-header host-part call
address-translation incoming-call calling-redir request-uri
interface fxs IF-FXS0
route call dest-table ROUTE-DIGITCOLLECT-FROM-FXSPORT
call-transfer
caller-id-presentation mid-ring
subscriber-number 98
interface fxs IF-FXS1
route call dest-table ROUTE-DIGITCOLLECT-FROM-FXSPORT
call-transfer
caller-id-presentation mid-ring
subscriber-number 97
context cs switch
no shutdown
authentication-service AUTH-SIP-ASTERISK
username 98 password GEHEIM encrypted
username 97 password GEHEIM encrypted
location-service LS-SIP-ASTERISK
domain 1 192.168.0.40
identity-group default
registration outbound
registrar 192.168.0.40
lifetime 60
register auto
call outbound
use profile voip default
use profile sip default
preferred-transport-protocol udp
call inbound
use profile tone-set default
use profile voip default
use profile sip default
identity 98 inherits default
authentication outbound
authenticate 1 authentication-service AUTH-SIP-ASTERISK
identity 97 inherits default
authentication outbound
authenticate 1 authentication-service AUTH-SIP-ASTERISK
context sip-gateway GW-SIP
interface GWIF-SIP
bind interface IF-ETH0 context router port 5060
context sip-gateway GW-SIP
bind location-service LS-SIP-ASTERISK
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF-ETH0 router
no shutdown
port fxs 0 0
pulse-dialing
tax-pulse-modulation bursts-16khz
encapsulation cc-fxs
bind interface IF-FXS0 switch
no shutdown
port fxs 0 1
pulse-dialing
tax-pulse-modulation bursts-16khz
encapsulation cc-fxs
bind interface IF-FXS1 switch
no shutdown
Beispiel-Konfiguration für SN414x FXS
Die folgende Konfiguration ist gültig für eine Smartnode SN4141 (Trinity) mit FXS-Ports.
Trinity SN4141
#----------------------------------------------------------------#
# #
# Patton Electronics Company #
# SN4141/8JS8V v2.3 (SmartNode 4141 VoIP Gateway) #
# SN/00A0BAXXXXXX #
# Release: 3.17.3-20081 2020/07/09 #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 4.00
rtp-port-range 10000 19999
actions
rule PROV_STARTUP
condition ip address:WAN.DHCP LINKUP initial
condition system ntp TIME_INITIALIZED
action 1 "provisioning execute PF_PROVISIONING_CONFIG"
profile aaa DEFAULT
method 1 local
method 2 none
console
use profile aaa DEFAULT
telnet-server
use profile aaa DEFAULT
no shutdown
ssh-server
use profile aaa DEFAULT
no shutdown
snmp-server
shutdown
web-server
protocol http port 80
protocol https port 443
use profile aaa DEFAULT
no shutdown
ntp
server 0.patton.pool.ntp.org
server 1.patton.pool.ntp.org
server 2.patton.pool.ntp.org
server 3.patton.pool.ntp.org
no shutdown
profile napt NAPT_WAN
dns-server
relay dns-client
shutdown
profile tls DEFAULT
authentication incoming
authentication outgoing
private-key pki:private-key/DEFAULT
own-certificate 1 pki:certificate/DEFAULT
diffie-hellman-parameters pki:diffie-hellman-parameters/DEFAULT-2048
profile provisioning PF_PROVISIONING_CONFIG
destination configuration
use profile tls DEFAULT
location 1 https://redirect.patton.com/$(system.mac);mac=$(system.mac);serial=$(system.serial);hwMajor=$(system.hw.major);hwMinor=$(system.hw.minor);swMajor=$(system.sw.major);swMinor=$(system.sw.minor);swDate=$(system.sw.date);productName=$(system.product.name);cliMajor=$(cli.major);cliMinor=$(cli.minor);osName=Trinity;subDirTrinity=/Trinity;subDirSmartWare=;dhcp66=$(dhcp.66);dhcp67=$(dhcp.67)
location 2 $(dhcp.66)
location 3 $(dhcp.66)/$(system.mac).cfg
location 4 http://$(dhcp.66)/$(dhcp.67)
location 5 http://$(dhcp.66)/$(system.mac).cfg
location 6 tftp://$(dhcp.66)/$(dhcp.67)
location 7 tftp://$(dhcp.66)/$(system.mac).cfg
activation reload immediate
profile fxs DEFAULT
electrical-standard etsi
caller-id standard fsk-etsi presentation mid-ring
tax-pulse-modulation bursts-16khz
profile fxs DEFAULT_EU
electrical-standard etsi
caller-id standard fsk-etsi presentation mid-ring
profile fxs DEFAULT_US
electrical-standard bell
caller-id standard fsk-bell presentation mid-ring
profile fxs-supplementary-services DEFAULT
profile tone-set DEFAULT
profile voip DEFAULT
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 bypass g711alaw64k rx-length 20 tx-length 20
profile pstn DEFAULT
profile ringing-cadence DEFAULT
play 1 1000
pause 2 4000
profile rip DEFAULT
profile sip DEFAULT
context ip ROUTER
interface WAN
ipaddress WAN 10.114.229.13/24
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
routing-table DEFAULT
route 0.0.0.0/0 gateway 10.114.229.10 metric 0
bgp
shutdown
rip
shutdown
nodems-client
server auto-discover
resource any
shutdown
profile ppp DEFAULT
cwmp-client
session-retry-maximum 1
no shutdown
stun
shutdown
context cs SWITCH
digit-collection timeout 4
routing-table called-e164 RT_to_FXS
route 77 dest-interface IF_FXS_00
route 13 dest-interface IF_FXS_01
route 99 dest-interface IF_FXS_02
route 98 dest-interface IF_FXS_03
routing-table called-e164 RT_to_SIP
route .T,# dest-interface IF_SIP
route default dest-interface IF_SIP
interface sip IF_SIP
bind context sip-gateway GW_SIP
route call dest-table RT_to_FXS
remote 10.114.229.10 5060
hold-method direction-attribute sendonly
early-disconnect
call-reroute emit
address-complete-indication accept set
privacy
address-translation outgoing-call diversion-header user-part redir host-part call
address-translation incoming-call calling-redir request-uri
interface fxs IF_FXS_00
route call dest-table RT_to_SIP
interface fxs IF_FXS_01
route call dest-table RT_to_SIP
interface fxs IF_FXS_02
route call dest-table RT_to_SIP
interface fxs IF_FXS_03
route call dest-table RT_to_SIP
interface fxs IF_FXS_04
route call dest-table RT_to_SIP
interface fxs IF_FXS_05
route call dest-table RT_to_SIP
interface fxs IF_FXS_06
route call dest-table RT_to_SIP
interface fxs IF_FXS_07
route call dest-table RT_to_SIP
context cs SWITCH
no shutdown
authentication-service AUTH-SIP-ASTERISK
username 77 password GEHEIM encrypted
username 13 password GEHEIM encrypted
username 99 password GEHEIM encrypted
username 98 password GEHEIM encrypted
location-service LS-SIP-ASTERISK
domain 1 10.114.229.10
identity-group default
registration outbound
registrar 10.114.229.10
lifetime 60
register auto
call outbound
use profile voip DEFAULT
use profile sip DEFAULT
call inbound
use profile tone-set DEFAULT
use profile voip DEFAULT
use profile sip DEFAULT
identity 77 inherits default
authentication outbound
authenticate 1 authentication-service AUTH-SIP-ASTERISK
identity 13 inherits default
authentication outbound
authenticate 1 authentication-service AUTH-SIP-ASTERISK
identity 99 inherits default
authentication outbound
authenticate 1 authentication-service AUTH-SIP-ASTERISK
identity 98 inherits default
authentication outbound
authenticate 1 authentication-service AUTH-SIP-ASTERISK
context sip-gateway GW_SIP
bind location-service LS-SIP-ASTERISK
interface IF_SIP
transport-protocol udp+tcp 5060
no transport-protocol tls
bind ipaddress ROUTER WAN WAN
context sip-gateway GW_SIP
no shutdown
sip-survivability
shutdown
port ethernet 0 0
bind interface ROUTER WAN
no shutdown
port fxs 0 0
subscriber-number 77
bind interface SWITCH IF_FXS_00
no shutdown
port fxs 0 1
subscriber-number 13
bind interface SWITCH IF_FXS_01
no shutdown
port fxs 0 2
subscriber-number 99
bind interface SWITCH IF_FXS_02
no shutdown
port fxs 0 3
subscriber-number 98
bind interface SWITCH IF_FXS_03
no shutdown
port fxs 0 4
bind interface SWITCH IF_FXS_04
no shutdown
port fxs 0 5
bind interface SWITCH IF_FXS_05
no shutdown
port fxs 0 6
bind interface SWITCH IF_FXS_06
no shutdown
port fxs 0 7
bind interface SWITCH IF_FXS_07
no shutdown
Beispiel-Konfiguration für SN4131 BRI
Die folgende Konfiguration ist gültig für eine Smartnode SN4131 (Trinity) mit BRI-Ports.
Trinity SN4141
#----------------------------------------------------------------#
# #
# Patton Electronics Company #
# SN4131/2BIS4VHP v2.3 (SmartNode 4131 VoIP Gateway) #
# SN/00A0BAXXXXXX #
# Release: 3.17.3-20081 2020/07/09 #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 4.00
rtp-port-range 6000 9999
profile aaa DEFAULT
method 1 local
method 2 none
console
use profile aaa DEFAULT
telnet-server
use profile aaa DEFAULT
no shutdown
ssh-server
use profile aaa DEFAULT
no shutdown
snmp-server
shutdown
web-server http
use profile aaa DEFAULT
no shutdown
web-server https
use profile aaa DEFAULT
shutdown
system
clock-source 1 bri 0 0
clock-source 2 bri 0 1
ntp
server 0.patton.pool.ntp.org
server 1.patton.pool.ntp.org
server 2.patton.pool.ntp.org
server 3.patton.pool.ntp.org
no shutdown
profile napt NAPT_LAN
dns-server
relay dns-client
shutdown
dns-client
name-server 192.168.100.254
profile tls DEFAULT
authentication incoming
authentication outgoing
private-key pki:private-key/DEFAULT
own-certificate 1 pki:own-certificate/DEFAULT
diffie-hellman-parameters pki:diffie-hellman-parameters/DEFAULT-2048
profile tone-set DEFAULT
profile voip DEFAULT
codec 1 g711alaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax transmission 2 bypass g711alaw64k rx-length 20 tx-length 20
profile pstn DEFAULT
profile sip DEFAULT
context ip ROUTER
interface LAN
ipaddress LAN 192.168.100.11/24
routing-table DEFAULT
route 0.0.0.0/0 gateway 192.168.100.11 metric 0
profile ppp DEFAULT
context cs SWITCH
digit-collection timeout 4
no shutdown
mapping-table calling-e164 to calling-e164 MAP-FIX-CTON-INTERNATIONAL
map (..) to 00\1
mapping-table calling-e164 to calling-e164 MAP-FIX-CTON-DEFAULT
map (..) to 0\1
mapping-table calling-e164 to calling-e164 MAP-CID-INTERNATIONAL
map 0([1-9].) to \1
map 00(..) to \1
# !!! edit local prefix here !!!
map ([1-9].) to 49231\1
mapping-table calling-e164 to calling-type-of-number MAP-CLIP-NO-SCREENING-TON-INTL
map default to international
mapping-table calling-e164 to calling-e164 MAP-CID-TO-NATL-TGT
# !!! edit local prefix here !!!
map ([1-9].) to 231\1
map 0([1-9].) to \1
map 00(..) to \1
mapping-table calling-e164 to calling-type-of-number MAP-CLIP-NO-SCREENING-TON
map 00[^0].. to international
map 0[^0].. to national
map default to national
mapping-table calling-si to calling-si MAP-CLIP-NO-SCREENING-SI
map default to user-not-screened
mapping-table calling-numbering-plan to calling-numbering-plan MAP-CLIP-NO-SCREENING-NP
map default to isdn-telephony
routing-table called-e164 ROUTE-DIGITCOLLECT-FROM-BRI
route .T,# dest-table ROUTE-BRI-INBOUND-NUMBERTYPE
route default dest-table ROUTE-BRI-INBOUND-NUMBERTYPE
routing-table calling-type-of-number ROUTE-BRI-INBOUND-NUMBERTYPE
route international dest-table ROUTE-FROM-BRI MAP-FIX-CTON-INTERNATIONAL
route default dest-table ROUTE-FROM-BRI MAP-FIX-CTON-DEFAULT
routing-table called-e164 ROUTE-FROM-BRI
route default dest-interface IF-SIPPBX
routing-table called-e164 ROUTE-FROM-SIPPBX
route 00[^0].. dest-table ROUTE-FROM-SIPPBX-INTERNATIONAL
route default dest-table ROUTE-FROM-SIPPBX-NATIONAL
routing-table called-e164 ROUTE-FROM-SIPPBX-INTERNATIONAL
route default dest-table ROUTE-FROM-SIPPBX-OUT CLIP-NO-SCREENING-INTL
routing-table called-e164 ROUTE-FROM-SIPPBX-NATIONAL
route default dest-table ROUTE-FROM-SIPPBX-OUT CLIP-NO-SCREENING-NATL
routing-table called-e164 ROUTE-FROM-SIPPBX-OUT
route default dest-service GROUP-IF-ISDN
complex-function CLIP-NO-SCREENING-INTL
execute 1 MAP-CID-INTERNATIONAL
execute 2 MAP-CLIP-NO-SCREENING-TON-INTL
execute 3 MAP-CLIP-NO-SCREENING-SI
execute 4 MAP-CLIP-NO-SCREENING-NP
complex-function CLIP-NO-SCREENING-NATL
execute 1 MAP-CLIP-NO-SCREENING-TON
execute 2 MAP-CID-TO-NATL-TGT
execute 3 MAP-CLIP-NO-SCREENING-SI
execute 4 MAP-CLIP-NO-SCREENING-NP
interface isdn IF-ISDN0
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
caller-name
isdn-date-time
interface isdn IF-ISDN1
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
caller-name
isdn-date-time
interface sip IF-SIPPBX
bind context sip-gateway GW-SIP
route call dest-table ROUTE-FROM-SIPPBX
remote 192.168.100.10 5070
hold-method direction-attribute sendonly
early-disconnect
call-reroute emit
address-complete-indication accept set
privacy
address-translation outgoing-call diversion-header host-part call
address-translation incoming-call calling-redir request-uri
service hunt-group GROUP-IF-ISDN
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF-ISDN0
route call 2 dest-interface IF-ISDN1
route call 3 dest-interface IF-ISDN2
route call 4 dest-interface IF-ISDN3
context sip-gateway GW-SIP
interface GWIF-SIP
transport-protocol udp+tcp 5060
no transport-protocol tls
bind ipaddress ROUTER LAN LAN
context sip-gateway GW-SIP
no shutdown
port ethernet 0 0
bind interface ROUTER LAN
no shutdown
port bri 0 0
clock slave
encapsulation q921
q921
protocol pp
uni-side user
q931
protocol dss1
uni-side user
max-calls 2
channel-range 0 1
encapsulation cc-isdn
bind interface SWITCH IF-ISDN0
port bri 0 0
no shutdown
port bri 0 1
clock slave
encapsulation q921
q921
protocol pp
uni-side user
q931
protocol dss1
uni-side user
max-calls 2
channel-range 0 1
encapsulation cc-isdn
bind interface SWITCH IF-ISDN1
port bri 0 1
no shutdown
Beispiel-Konfiguration für SN4638 BRI
Die folgende Konfiguration ist gültig für eine Smartnode SN4638 (SmartWare) mit BRI-Ports. Ebenfalls gültig für SN463x-Geräte, z.B. SN4635.
SmartWare SN4638
#----------------------------------------------------------------#
# #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
dns-client server 192.168.1.1
dns-client server 192.168.1.2
webserver port 80 language en
clock local default-offset +01:00
clock local dst-rule CEST +02:00 from 02:00 mar last sunday until 03:00 oct last sunday
sntp-client
sntp-client server primary 0.de.pool.ntp.org port 123 version 4
sntp-client server secondary 1.de.pool.ntp.org port 123 version 4
system
ic voice 0
low-bitrate-codec g729
system
clock-source 1 bri 0 0
clock-source 2 bri 0 1
clock-source 3 bri 0 2
clock-source 4 bri 0 3
profile ppp default
profile tone-set default
dtmf-signal-level -3
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax transmission 2 bypass g711alaw64k
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF-ETH0
ipaddress 172.17.14.226 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
route 0.0.0.0 0.0.0.0 172.17.14.254 0
context cs switch
digit-collection timeout 4
national-prefix 0
international-prefix 00
routing-table called-e164 ROUTE-DIGITCOLLECT-FROM-BRI
route .T,# dest-table ROUTE-FROM-BRI
route default dest-table ROUTE-FROM-BRI
routing-table called-e164 ROUTE-FROM-BRI
route default dest-interface IF-SIPPBX
routing-table called-e164 ROUTE-FROM-SIPPBX
route default dest-service GROUP-IF-ISDN
interface isdn IF-ISDN0
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN1
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN2
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN3
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN4
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface sip IF-SIPPBX
bind context sip-gateway GW-SIP
route call dest-table ROUTE-FROM-SIPPBX
remote 192.168.1.1
hold-method direction-attribute
early-disconnect
call-reroute emit
address-complete-indication accept set
privacy
address-translation outgoing-call diversion-header host-part call
address-translation incoming-call calling-redir request-uri
service hunt-group GROUP-IF-ISDN
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF-ISDN0
route call 2 dest-interface IF-ISDN1
route call 3 dest-interface IF-ISDN2
route call 4 dest-interface IF-ISDN3
context cs switch
no shutdown
context sip-gateway GW-SIP
interface GWIF-SIP
bind interface IF-ETH0 context router port 5060
context sip-gateway GW-SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF-ETH0 router
no shutdown
port ethernet 0 1
medium auto
no encapsulation
shutdown
port bri 0 0
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN0 switch
port bri 0 0
no shutdown
port bri 0 1
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN1 switch
port bri 0 1
no shutdown
port bri 0 2
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN2 switch
port bri 0 2
no shutdown
port bri 0 3
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN3 switch
port bri 0 3
no shutdown
port bri 0 4
clock master
power-feed
encapsulation q921
q921
uni-side net
encapsulation q931
q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN4 switch
port bri 0 4
no shutdown
Beispiel-Konfiguration für SN4638 BRI - clip 'no screening'
Die folgende Konfiguration ist gültig für eine Smartnode SN4638 (SmartWare) mit BRI-Ports. Ebenfalls gültig für SN463x-Geräte, z.B. SN4635.
SmartWare SN4638 - clip 'no screening'
#----------------------------------------------------------------#
# #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
dns-client server 192.168.1.1
dns-client server 192.168.1.2
webserver port 80 language en
clock local default-offset +01:00
clock local dst-rule CEST +02:00 from 02:00 mar last sunday until 03:00 oct last sunday
sntp-client
sntp-client server primary 0.de.pool.ntp.org port 123 version 4
sntp-client server secondary 1.de.pool.ntp.org port 123 version 4
system
ic voice 0
low-bitrate-codec g729
system
clock-source 1 bri 0 0
clock-source 2 bri 0 1
clock-source 3 bri 0 2
clock-source 4 bri 0 3
profile ppp default
profile tone-set default
dtmf-signal-level -3
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax transmission 2 bypass g711alaw64k
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF-ETH0
ipaddress 172.17.14.226 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
route 0.0.0.0 0.0.0.0 172.17.14.254 0
context cs switch
digit-collection timeout 4
national-prefix 0
international-prefix 00
routing-table called-e164 ROUTE-DIGITCOLLECT-FROM-BRI
route .T,# dest-table ROUTE-FROM-BRI
route default dest-table ROUTE-FROM-BRI
routing-table called-e164 ROUTE-FROM-BRI
route default dest-interface IF-SIPPBX
routing-table called-e164 ROUTE-FROM-SIPPBX
route default dest-service GROUP-IF-ISDN
interface isdn IF-ISDN0
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN1
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN2
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN3
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface isdn IF-ISDN4
route call dest-table ROUTE-DIGITCOLLECT-FROM-BRI
display emit
isdn-date-time
caller-name
interface sip IF-SIPPBX
bind context sip-gateway GW-SIP
route call dest-table ROUTE-FROM-SIPPBX
remote 192.168.1.1
hold-method direction-attribute
early-disconnect
call-reroute emit
address-complete-indication accept set
privacy
address-translation outgoing-call diversion-header host-part call
address-translation incoming-call calling-redir request-uri
service hunt-group GROUP-IF-ISDN
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF-ISDN0
route call 2 dest-interface IF-ISDN1
route call 3 dest-interface IF-ISDN2
route call 4 dest-interface IF-ISDN3
context cs switch
no shutdown
context sip-gateway GW-SIP
interface GWIF-SIP
bind interface IF-ETH0 context router port 5060
context sip-gateway GW-SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF-ETH0 router
no shutdown
port ethernet 0 1
medium auto
no encapsulation
shutdown
port bri 0 0
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN0 switch
port bri 0 0
no shutdown
port bri 0 1
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN1 switch
port bri 0 1
no shutdown
port bri 0 2
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN2 switch
port bri 0 2
no shutdown
port bri 0 3
clock slave
encapsulation q921
q921
protocol pp
uni-side user
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN3 switch
port bri 0 3
no shutdown
port bri 0 4
clock master
power-feed
encapsulation q921
q921
uni-side net
encapsulation q931
q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF-ISDN4 switch
port bri 0 4
no shutdown
Zusätzliche Informationen
Informationen und Hinweise zu Patton SmartNode-Geräten.
Link zur Hersteller-Dokumentation: